New Holland EZ-Steer™ Assisted Steering System

Hands free steering

Add an EZ-Steer™ Assisted Steering System to the EZ-Guide® Plus lightbar for hands free steering. EZ-Steer uses guidance information from the lightbar to turn the steering wheel for you, providing one-foot, pass-to-pass accuracy in most locations. You'll focus more on equipment operation and experience less stress and fatigue. EZ-Steer system accuracy is suited to spraying, spreading, tillage, small grain harvesting and broad acre seeding operations.

Typical installation time is less than 30 minutes on any approved agricultural vehicle and requires only one wrench, and EZ-Steer can be moved easily from vehicle to vehicle. Your New Holland dealer has additional vehicle installation kits if needed.

Setup takes just a few minutes when you use the EZ-Guide Plus lightbar to input vehicle dimensions, supplied with the EZ-Steer system. Just set your straight or curved A-B line on your first swath. Then turn to the next swath and press the engage button to activate the EZ-Steer system. To disengage, press the disengage button or manually turn the steering wheel.

If you have an older tractor, want a low cost alternative to auto-guidance or need an assisted steering system to round out your fleet, the EZ-Steer system is for you. For fully integrated, high accuracy auto-guidance solutions, see your New Holland dealer.

EZ-Steer and EZ-Guide are trademarks of Trimble Navigation Limited.