Heavy-duty Models feature gear drive and high-speed tines with greater tip speed for one-pass tilling.
Designed to Fit Tractors from 13.5 to 50 PTO hp equipped with Category I or II hitch (depending on model) and 540-rpm PTO.
Box Section Steel Frame supports the Category I or II three-point hitches, depending on model. Outside hitch pin brackets are bolted to the frame-and are adjustable for offset operations such as tilling close to obstacles or buildings. Deck is constructed of 1/8 inch-thick steel for built-in strength.
540-rpm PTO is slip-clutch protected to prevent driveline component damage.
Driveline Universal joints and Rotor Shaft Bearings have grease fittings for longer life. And, both the input gearbox and side gearbox run in oil for smooth power transmission and minimal wear.