New Holland Mowers Mid Mount Finishing

Mow Close to Trees, Shrubs and Buildings. Add a Grass Collection System Too.

You'll cut mowing jobs down to size with a mid-mount finishing mower from New Holland. The beauty of a mid-mount mower, is that it's easy to mow right next to trees, shrubs and buildings while still keeping an eye on the job. And, you'll appreciate the mowing quality. There are four cutting widths available: 54, 60, 72 and 84 inches.

The 54CMS and 60CMS Mid-mount Finishing Mowers are the perfect match for New Holland Boomer™ sub-compact tractors.

Choose the 914A Mid-mount Finishing Mower to fit Boomer models TC21DA, TC23DA, TC24DA, TC26DA, TC29DA, TC33DA, TC35D/35DA, TC40D/40DA, TC45D/45DA. Depending on the model, you can select mowing widths from 54 to 84 inches.

Grass Collection Systems are available for the 54MS and 60MS mid-mount mowers and for the 54- and 60-inch 914A mowers. Both feature a quick-attach design, that allows you to easily change between bagging and side discharge, and a three-bag collection system that keeps emptying stops to a minimum.

Mid-shaft Drive for increased durability.

Automatic Belt Tensioning System ensures smooth operation and eliminates the need to manually tighten belts.

The Quick-attach Design allows these mower decks to be attached and detached in minutes without tools.The mower wheels turn to help you roll the deck out from under the tractor.

The Mower Deck Can be Locked in the Raised Position from the tractor seat to allow for three-point hitch or loader work

A Blade Tip Speed of up to 15,500 ft. per minute delivers smooth, efficient cutting action.

Variable Height Adjustment from one to four inches. Simply move the lever to your desired cutting height and lower the deck.

Free-floating, Four-bar Linkage allows the mower to move up and down to follow ground contours.

Stamped Steel Construction stands up to many seasons of use.

The 914A is Compatible with New Holland Boomer™ Models:

• TC21DA, TC23DA, TC24DA, TC26DA, TC29DA
• TC33DA, TC35D/35DA
• TC40D/40DA, TC45D/45DA

Select Side- or Rear-discharge Models:

• Side-discharge models:  54, 60 and 72 inches
• Rear-discharge models:  60, 72 and 84 inches

Heavy-duty, Welded Construction eliminates deck failures for long life and low maintenance.

Three Overlapping Blades spin at up to 16,000 ft. per minute for smooth, efficient cutting action.

Four GATOR MULCHER™ Blades do the work on the 84-inch model. The four-blade design delivers a best-in-class blade overlap of one and a half inches. The four-tooth blade design provides outstanding mulching and cut quality.

Cutting Height is Easy to Adjust in half-inch increments, from one-and-a-half to four inches. Just use the simple pin-mounted gauge wheels at the front and the lever-adjust at the back of the mower-no tools needed.

Free-floating, Four-bar Linkage allows the mower to move up and down to follow ground contours and avoid scalping.

You Can Raise and Lower the Deck with the tractor hydraulics. And, the mower deck can be locked in the raised position when using the tractor for three-point hitch jobs.

Routine Maintenance is quick and easy. Spindles can be greased from the top of the mower deck without moving shields.

The 914A Can be Mounted Simultaneously with 12LA, 14LA, 15LA, 16LA and 17LA front-end loaders for greater versatility.

Large Bushel Capacities allow you to mow more and stop less. Two models are available:

Model: 9CG
Capacity: 12 bushels (3 bag system)
Mower Deck Compatibility: 54CMS/60CMS mid-mount finishing mowers

Model: Unit for 914A
Capacity: 10 bushels (3 bag system)
Mower Deck Compatibility: 914A mid-mount finishing mowers (54- and 60-inch models only)

Quick-attach Design makes it practical to convert from bagging to side-discharge operation in minutes.

PTO Driven Turbine delivers clippings from the mower discharge to the collection bags and provides quieter operation. Its increased performance and grass suction allows for better bagging in wet and/or heavy conditions.

Storage Stands are standard equipment for easy removal.