Dependability that never goes out of style

New Holland TB tractors are economical, reliable performers made for dependable day-to-day operation. They’re designed for exceptional operator comfort and convenience with a host of user-friendly features.

Powered by large displacement engines (304 cu. in. on the TB100 and TB110 and 456 cu. in. on the TB120), TB tractors run smoothly and have low fuel requirements.

Three reliable transmission choices are available to match your needs: standard 8 x 2 constant-mesh, optional 16 x 4 Dual Command™ transmission, and optional 12 x 3 with creeper gear.

Rugged 2WD and 4WD front axles are designed for maximum strength and load-carrying capacity.

Ample hydraulic flow capacity is available to power implements. Independent steering and implement pumps ensure maximum performance.

Three point hitch lift capacity is 4,200 lbs. Precise control of draft and position lets you set the proper depth and pull requirements for implements before you start working.

Operator station features a roomy step deck with a no-slip floor mat. There’s plenty of foot room and an uncluttered entry and exit path.

Servicing a TB Tractor couldn’t be simpler,  with the TB tractor’s flip-up hood and easy-to-access daily service checkpoints.

Wet disc brakes are powerful and durable for stops under heavy loads.

Mechanical differential lock is foot-pedal operated.

The 46LB loader, made exclusively for the TB tractor, makes short work of loading, hauling and material handling chores.

Engine

TB Tractors are powered by New Holland engines that deliver powerful, yet fuel-efficient, performance. The TB100 and the TB110 engines are turbocharged; the TB120 is naturally aspirated.

"Cross-flow" cylinder heads and large diameter valves ensure complete fuel combustion and better fuel efficiency.

Parent bore design means working life is long and durable. There are no joints at the tops and bottoms of wet sleeves to leak and no O-rings to break down.

Torque reserve of up to 40% keeps you working productively under load.

Fuel system is equipped with two filters and one fuel water trap with electric sensor/warning system that protects the system components from water pollution damage.

The standard 8 x 2 constant mesh or optional 16 x 4 Dual Command™ transmissions let you match ground speeds to the job at hand. Optional 12 x 3 (8 x 2 with creeper) transmission is available for specialized chores when slow movement is required.

8 x 2 constant-mesh transmission is built for all-around, efficient operation.

• Eight forward and two reverse speeds allow engine and ground speeds to be closely matched to the work you’re doing.
• Wide gears provide the strength to stand up to full power loads.
• Transmission controls are conveniently positioned to the right where they are easy to reach.
• Long-lasting 14-inch Cerametallic disc increases clutch life and efficiently dissipates heat.
• Helical cut gears ensure efficient, quiet transfer of power.

Optional 16 x 4 Dual Command™ provides wide range of speeds to match the job.

• Dual Command™ range shift features a two-speed power shift in each of the eight forward gears.
• Switch to low range is made by simply pressing a button on the main shift lever grip.
• Pulling power of the tractor is increased in the low range. When low range is selected, speed is reduced by 18% and torque is increased by 22%.

Standard heavy-duty 2WD or optional FWD front axles are designed for maximum strength, high load-carrying capacity and easy adjustment of wheel track width.

• Track width adjustment is easy—just remove six locking bolts.
• Excellent maneuverability and stability allow sharp turns in tight spots.
• Components are fully protected behind the main beam to reduce chance of damage.
• 5,401-lb. unrestricted front axle capacity (2WD).

FWD axle option saves time and fuel.

• Tight turning angle for easy maneuverability in close quarters.
• FWD reduces wheel slippage to cut field time and conserve fuel. Because tires slip less, actual drawbar horsepower is increased by up to 25%.
• It’s easy to engage and disengage FWD, when traction decreases due to slippery ground conditions. Just flip a switch.
• Simple one-touch activation engages FWD on-the go. Just push the top half of the rocker switch to disengage or push the bottom half to engage. It couldn’t be easier!
• FWD is automatically engaged when both brake pedals are depressed, which means better stopping while in transport on highways.

Hydraulics

TB tractors offer excellent hydraulic capacity. Independent steering and implement pumps eliminate the need for the steering system to pull hydraulic flow from the hitch and remote circuit.

Independent hydraulic systems ensure maximum performance. The steering pump feeds the hydrostatic steering system while the main gear pump supplies the 3-point hitch and remotes.

Main hydraulic pump supplies 9.3 gpm to the remotes and 3-point hitch. Total flow of the main and optional auxiliary pump is 17.8 gpm to the remotes and 3-point hitch.

Multi-function, standard remote valves ensure maximum productivity and efficiency.

Up to four auxiliary remote valves (two standard, two optional) can be fitted to the rear of the tractor. Remote valves can be operated on open- or closed-center hydraulic equipment.

Flow control is standard on each remote valve.

Raise, lower and float detents are standard on each remote valve.

Heavy-duty three-point linkage provides lift capacity of up to 4,200 lbs. to handle large implements.

Linkage features two positions for lift height to accommodate all implements and ground conditions.

Two independent levers are used to operate three-point hitch. The system provides accurate operation in Position and Draft:

• Position Control ensures accurate positioning of above-ground implements such as sprayers or for safe road transportation. The system maintains a set height of the lift linkage, regardless of implement weight or ground condition.
• Draft Control is used when operating soil-engaging implements when a constant draft force is required.

Telescopic stabilizers on the hitch arms prevent the mounted implements from swinging side to side.

Fixed support, swinging drawbar is strong and easy to use.

PTO is engaged by a single handle located to the left of the operator. Engagement ensures excellent featherability.

Heavy duty, independent PTO wet-disc clutch pack is engaged hydraulically.

Easy hook-up of PTO driveline with a flip up/ flip down PTO shield.

Optional flex link ends make hookups easier.

The TB tractor’s operating environment is ergonomically designed to improve operator comfort and reduce fatigue.

Operator platform features a roomier step deck with a no-slip floor mat. There’s plenty of foot room and an uncluttered entry and exit path. Anti-slip steps make entry and exit from both sides of the tractor safer. Step height can be adjusted to suit the operator. Control levers are conveniently located on the right-hand side.

Padded, comfort-contoured seat is adjustable. Retractable seatbelt makes buckling up more convenient. Two-post ROPS structure ensures optimum visibility.

ROPS structure folds down for clearance in low areas. Height is reduced by eighteen inches to allow easy maneuvering under obstructions or in low-clearance buildings. Assist handle makes raising and lowering the ROPS simple.

Steering column features four-position tilt for added comfort.

Large tail lights add to your safety by making the tractor more visible in low light conditions.

Exhaust stack is located to the left side of the hood so visibility is not impaired.

Deluxe full-coverage fenders are standard. Crown fenders are optional.

A seven-pin outlet supplies power for trailer and implement lighting. A single-pin accessory power outlet (8 amp) is standard.

One-piece, flip-up engine hood features a convenient lift-assist piston and easy-latch system. When raised, the hood offers complete engine access.

Air filter and other components are located under the flip-up hood for quick access.

Battery is conveniently located under the floor on the right-hand side of the platform. Battery box compartment also contains a toolbox with a removable tool tray.

Transmission oil fill/check is conveniently located so service can be completed from a single point at the rear of the tractor.

Dual 3/16 inch-thick steel fuel tanks have a total capacity of thirty-seven gallons. The tanks have a single fill point on the left side andcan be filled from the ground. A large opening on the fuel tank minimizes spillage when filling from a container. A locking fuel cap is standard.

The 46LB loader, made exclusively for the TB tractor, makes short work of loading, hauling and material handling chores.

Outstanding visibility results from a mid-mount design, narrow boom arms and small uprights. There are no bulky towers to inhibit your view.

Easy- to-use joystick controls loader functions.

A breakout force of up to 4,230 lbs. and a generous lift height of 11.4 ft. allow you to lift and move large loads fast.

Bucket level indicator and parking stand are standard equipment.

Quick-Attach loader design allows you to attach or remove the 46LB in as little as five minutes.

Optional skid-steer style Quick-Attach bucket device lets you easily attach to a variety of buckets and attachments, including implement boom, grapple bucket and bale spear.

Optional reversible, bolt-on cutting edge provides maximum efficiency.