Choose the level of specification that matches your needs--Standard, Plus or Deluxe.

• The Standard configuration (TS100A and TS115A only) offers exceptional reliability and performance with the economy of a 12 x 12 transmission.
• The Plus configuration (TS100A, TS115A, TS125A) provides exceptional value, with a choice of transmission and number of rear remotes.
• The Deluxe configuration (all models) provides an impressive list of standard and optional features designed to enhance your productivity and comfort, including electro-hydraulic remotes, electronic draft control, a suspended cab option, a SuperSteer™ axle option and a Terraglide™ axle option.

TS-A provide dependable power for your toughest jobs

Choose the TS-A transmission that best suits the work you do:

• 12 x 12 Synchro Command™ transmission
• 24 x 24 Dual Command™ transmission
• 16 x 16 Electroshift™ transmission
• 16 x 16 Autoshift™ transmission

Responsive hydraulic power results from a high-capacity, two-pump hydraulic system.

Four axle choices allow you to build the TS-A tractor that works best for your conditions. Choose 2WD, FWD, SuperSteer™ FWD or Terraglide™ FWD.

Custom Headland System gives you one button control of up to 28 tasks.

The all-weather Horizon cab and spacious flat deck both offer outstanding visibility, convenient controls and an uncluttered work space.

Easy servicing is part of the TS-A tractor design.

The new 56LB front-end loader makes your chores go faster.

Computer-designed, parent bore cylinder block has a contoured outer surface for increased strength.

Air-to-air intercooling improves performance, while a five-blade viscous fan maintains temperature, reduces noise, lowers horsepower consumption, and saves fuel.

Electronic power management (on the TS125A and TS135A only) provides a power boost of up to 25 horsepower to maintain rated PTO hp in challenging terrain or conditions, like chopping or baling extra-heavy crops, or operating with a heavy load on a hill. When the torque applied through the PTO exceeds a certain level, power management automatically increases the available engine horsepower. Then, as the need for additional power decreases, engine horsepower is reduced until the system reverts to standby mode.

The Constant Engine Speed feature on the TS125A and TS135A allows you to pre-set two engine speeds. Use one for a constant working RPM, then toggle to the lower RPM to turn at the end of the row.

Transmissions

You choose the TS-A transmission that best suits the work you do. All transmissions offer the convenience of a dedicated, column-mounted, left-hand shuttle lever, and all are available with creeper speeds for low-speed applications.

12 x 12 Synchro Command™ transmission with mechanical shuttle
(TS100A and TS115A only)

• The range lever at the far right allows you to choose one of three ranges while the main shift lever offers four synchronized gears in each range.
  
• A dedicated, in-line shuttle lever
is located on the left-hand side of the steering column, freeing your right hand to control the implement or loader.

• The matching number of forward and reverse gears
leads to faster cycle times when shuttling.

24 x 24 Dual Command™ Hi-Lo transmission with power shuttle
(Available on all models)

• A clutchless power shuttle allows you to shift between forward and reverse without clutching.
  
• The Dual Command feature gives you double the speed choices
by allowing you to select an underdrive for each of the 12 forward and reverse gears while on the move. This effectively changes torque by 22% and tractor speed by approximately 18%.

• Repeater buttons in two locations
—one set on the side of the shift lever and one set on the control console below—allow you to powershift on-the-go without clutching Use the lower button (tortoise) to engage the underdrive. Push the upper button (hare) to disengage Dual Command and return to direct drive.

• Transport speed
is 19 mph for 2WD models and 25 mph for FWD models.

16x16 Electroshift™ transmission with power shuttle
(TS100A and TS115A Plus only)

• Powershift through the four gears of each range with the touch of a button. You can also change between the first and second range, and between the third and fourth range without clutching.
  
• Two buttons on the side of the transmission lever and a duplicate set under the gear display
allow you to powershift through the gears within each range. Tap the button to move one gear at a time, or hold the button in to shift sequentially. The single button immediately below the display allows you make easy range changes. You need the clutch only once in 16 gears.

• No-clutch, electro-hydraulic shuttle is ideal for loader work and other jobs that require frequent forward/reverse shifts. You engage it by simply moving the shuttle lever located on the left-hand side of the steering column.
  
• Programmable reverse
allows you to program the reverse speed to three gears lower or higher than your forward speed, providing they are in the same range. This is a feature you won’t find on most other tractors.

16 x 16 Autoshift™ transmission with power shuttle and automatic and programmable up/down shifting.
(TS100A Deluxe, TS115A Deluxe, TS125A and TS135A)

• Offering the same operational convenience as the 16 x 16 Electroshift™ transmission, the 16 x 16 Autoshift™ transmission has even more time-saving features.
  
• Push the Autoshift button
, and the 16 x 16 Autoshift transmission does the shifting for you—both in the field and the road.

• In the field, the Autoshift transmission shifts as needed within the four gears of range one or within the four gears in range two. When the load on the engine increases, or tractor speed slows, the transmission will automatically shift to a lower gear.
  
• When roading,
press the Autoshift button and the transmission will shift as needed within ranges three or four. Press the Autoshift button twice, and you can program the transmission to shift as needed between ranges three and four—another unique feature.

• You can program the shift point
to suit different applications and to tailor shifting to your driving style—another feature you won’t find on most other tractors. You can set the shift point to occur every time the engine speed increases or decreases by a specific percent.

The electro-hydraulic power shuttle allows you to shift from forward to reverse with the touch of your left hand. There’s no need to let go of the steering wheel, and no need to clutch.

An open center system with a 19.8-gpm fixed displacement gear pump is provided on Standard models with the 12 x 12 transmission or on Plus models with the 24 x 24 synchronized transmission.

A closed-center load-sensing (CCLS) system delivers 26.5 gpm to the remotes on demand for Deluxe models with the 16 x 16 or 24 x 24 transmission.

Impressive three-point lift capacities allow you to use larger implements to get more work done with each pass. You get a lift capacity of 12,185 pounds with the largest model, the TS135A, 9,620 pounds for other TS-A models with electronic draft control, and 9,285 pounds for models with mechanical draft control.

Two deluxe remote valves with quick couplers are standard from the factory, with third and fourth valves optional.

Electro-hydraulic remote control valves are available on Deluxe cab models with the 16 x 16 transmission. You can control the flow rate and timing of these valves from the cab and keep informed of their status using the visual display and enhanced monitor.

A Category II, three-point hitch with mechanical draft control and lower link sensing is standard equipment for the TS100A, TS115A and TS125A. These tractors also feature a convenient quick raise and lower switch that returns implements to their pre-set depth.

A Category II/IIN three-point hitch with electronic draft control is standard on the TS135A, and all Deluxe cab models. Once set, the hydraulic system automatically adjusts implement depth to maintain an even pull on the tractor and reduce wheel slip to a minimum. Using postition control you get accurate control of implements, such as spryaers, rakes and mowers that operate above the ground. Once implement height has been set, the system maintains the selected position.

Controls for electronic draft control are located conveniently on the right-hand armrest console, with additional hydraulic controls located under the armrest. (Deluxe cab models only)

Dynamic Ride Control™ is standard equipment on electronic draft control hitches, and takes the bounce out of three point-mounted implements during transport.

Rocker switches on the rear fenders (Deluxe cab tractors only) allow you to raise and lower the three-point hitch for easy implement attachment.

A rear 540/1000 RPM PTO is standard equipment. It has a single reversible shaft and includes soft start and coast down features.

Heavy-duty wet plate front and rear differential locks (all FWD axles) allow you to lock all four wheels together in slippery conditions. 2WD tractors have differential lock in the rear axle only.

The TerraLock™ electronic traction system is standard on all TS-A Deluxe FWD tractors. This gives you the convenience of fully automatic FWD and differential lock engagement. You get full drive capability through all four wheels for optimum traction.

SuperSteer™ FWD Axle
(not available on tractors equipped with the Terraglide axle)

• An unmatched 65° turn angle makes maneuvering in tight quarters easy, and saves you time and travel distance when making headland turns.
• A heavy-duty ball joint attaches the SuperSteer axle to the tractor. When the tractor turns, the whole axle pivots, allowing the outside wheel to move in front of the nose of the tractor to provide more tire clearance and sharper turning angle.

Terraglide™ Suspended FWD Axle
(not available on tractors equipped with the SuperSteer axle)

• The TerraGlide™ axle travels up to 4 inches to keep the front tires on the ground even at high speeds, providing not only an ultra-smooth ride, but also delivering maximum traction, stability and control.
• Terraglide is a simple, affordable design--unlike complicated systems found on other tractors.
• Terraglide is automatically activated at speeds over 0.9 mph, but can be locked out if not required. That's a feature you won't find on other systems.
• The suspended cab and TerraLock are standard equipment with TerraGlide tractors.

The TS-A Custom Headland System (CHS) takes the hassle and fatigue out of headland turns by memorizing and replaying your actions. With the push of the CHS button at the end of a row, you can throttle back, downshift, and raise the implement. You can make your turn, then press the same button for an opposite sequence of actions when you're ready to re-enter the row. This system is optional on Deluxe TS-A cab tractors with a 16 x 16 transmission.

Up to 28 steps or functions can be memorized by the Custom Headland System, either as one continuous program, or as two individual programs--one for when you reach the end of the row, and a second for when you re-enter a row.

Actions that can be programmed include:

• Increase/decrease engine speed
• Change gear selection
• Raise/lower the three-point hitch
• Control electro-hydraulic remotes (if so equipped)

Field Autoshift mode or Constant Engine Speed Control are automatically disengaged and re-activated by the CHS if you happen to be using these features.

Symbols appear in the transmission display to let you know which actions are being recorded or replayed. Up to seven symbols may be displayed at one time.

Less experienced drivers gain the same efficiency as your best ones when you have a skilled driver program the headland turn sequences.

Front and rear windshield wiper/washers are standard equipment.

The expansive windshield and two wide, full-glass doors provide outstanding visibility. Sweeping views make it easier to stay fresh all day long.

A unique high-visibility panel on the cab roof with built-in sunshade affords you a view above--great for seeing the bucket during loader work. The panel can be opened for natural circulation.

A deluxe air suspension seat adjusts in a multitude of ways to assure your absolute comfort. Features include built-in lumbar support, tilting back rest, swivel, adjustable armrests and adjustable vibration dampening.

An optional instructor's seat is available and replaces the standard storage box.

A cup holder and interior storage are provided to your left. An optional storage box can be added behind the instructor's seat or standard equipment box.

Heat and air conditioning controls are located conveniently on the rear cab pillar to your left.

.

The halogen light package is far superior to what you'll find on other tractors in this class. Eight lights to the front and four to the rear provide you with plenty of light to work at night.

Optional Comfort Ride™ cab suspension (available on Deluxe models, standard on models with the Terraglide™ axle) provides a smooth, even ride over rough ground or bumpy access roads. The system uses front-mounted "donuts" that minimize the right-to-left movement of the cab, while two rear-mounted shock absorbers absorb the up-and-down movement of the cab.

Enhanced performance monitor (standard on 16 x 16 Deluxe cab tractors and optional on Deluxe 24 x 24 cab tractors) allows you to track and program a variety of functions including linkage height, PTO speed, hours, distance traveled and electronic remote valve status. It also includes a maintenance reminder and an odometer.

Optional radar (available on cab tractors equipped with electronic draft control) monitors wheel slip and allows you to receive accurate reports of total area worked and area-covered-per-hour forecasts.

Large, wide steps and full-length support handles make it easy to step aboard.

Suspended floor pedals provide an uncluttered path on and off.

Throttle and transmission controls are placed in a natural position on the right-hand console, and always come easily to hand. Hitch controls with electronic draft control are on the right-hand armrest for fingertip control.

The deluxe seat with mechanical suspension swivels and adjusts to fit you perfectly.

The steering wheel tilts and telescopes to a position that's most comfortable for you.

Instrumentation is located directly in front of you, providing information at a glance.

Analog and digital instrumentation includes an hour meter, tachometer, and engine temperature and fuel gauges. LCD displays report ground speed, time, PTO speed, three-point position and wheel slip. A series of 21 indicators and warning lights keep you informed.

.

When it's time for routine maintenance, you can tell that a lot of thought was put into the design of TS-A tractors. Servicing is made easier by a host of time-saving conveniences.

Engine oil can be checked and filled without raising the hood.

The convenient, one-piece TS-A hood opens effortlessly on gas struts to provide access for routine maintenance.

The oil cooler and A/C condenser slide out to the side for easy cleaning.

A 58.1-gallon fuel tank is standard on the largest three models,  with a 46.7-gallon tank on the TS100A.

Ground-level fueling saves time and effort.

56LB Loader

You can lift, move and place materials fast with the new 56LB front-end loader. It's the perfect match for your TS-A tractor no matter which axle configuration you choose--2WD, FWD, SuperSteer™ FWD or TerraGlide™ FWD.

A lift capacity of up to 3,800 lbs. and breakout force up to 5,300 lbs. allows you to lift heavy loads when needed.

For an exceptional 13.5-ft. lift height, choose the high-lift option. Standard lift height is a respectable 12 ft.

A bucket level indicator is standard. Mechanical self-leveling is optional.

The Quick-Attach loader design allows you to move quickly from job to job.

A universal Quick-Attach bucket device allows for easy mounting of a variety of attachments for maximum versatility.

Available attachments include:

• 48-in. bale spear
• 48-in. pallet fork
• 84-in. general purpose bucket
• 84- and 96-in. heavy-duty buckets
• 84-in. heavy-duty bucket with bale and silage grapple
• 96-in. high-volume bucket