Kubota M108X |
| |
| Features |
CRS (Common Rail System)
Typically found in automobiles to help reduce emissions and decrease fuel consumption, CRS has been implemented on our M108X engine to accomplish the same results. The CRS electronically controls the timing and amount of fuel injection. By delivering high-pressure injections in stages, rather than all at once, an optimal combustion rate is achieved, thus offering greater efficiency in the cylinder. This equates into less combustion noise, commonly known as “diesel knocks”, better fuel efficiency and cleaner emissions. By controlling the amount of fuel injection, the CRS also serves to provide greater torque so that operations in the mid-to-high revolution range, such as baling, can be performed more smoothly. |
 |
| |
|
Cooled EGR System
Our Cooled EGR (Exhaust Gas Recirculation) System aims at the same end as the CRS, to reduce noxious emissions. Specifically, the Cooled EGR System reduces smog-producing nitrogen oxides by lowering the combustion temperature. It accomplishes this by diverting exhaust gas through a cooler and then returning it to the combustion chambers, where the cooled gases minimize temperatures and hamper nitrogen oxide formation. |
 |
| |
Auto-Mode
Our new Auto-Mode is a must-have feature that enables the M108X to automatically shift in a maximum range of 4 gears (the preset gear and 3 up or downshifts) to maximize performance when your load or terrain changes. In travel mode, the tractor will adjust gearing depending on road conditions and amount of acceleration; uphill and downhill. The transmission automatically downshifts 3 gears and will upshift again once in motion. In field mode, to better accommodate turning, a downshift of 2 gears occurs once the three-point hitch has been raised. The Sensitivity dial lets you achieve your desired shift timing, providing you with quick and precise power response. |
 |
| |
|
Standard Remote Control Valves and Optional Flow Control Valve
Two remote valves come standard on the SCD/Self-Canceling Detent and FD/Floating Detent valve. The optional flow control valve also provides simultaneous operation of the 3-point hitch and a remote valve, or two remote valves. Adjustment of hydraulic flow from 0 to maximum is also possible. The maximum installation is 4 valves (3 valves with a flow control valve). |
 |
| |
|
Quick Implement Hookup
Telescopic lower link ends of the category II 3-point hitch permit fast and easy implement attachment. Telescopic stabilizers, turn buckle, right-lift rod, and the left fender-mounted remote hitch switch also make hookup a snap. |
 |
| |
|
Trailer Coupler
An electric outlet is standard for use with a trailer or additional implements.
|
 |
| |
|
Hydraulic System
For smooth implement handling and for extra speed of front loader and rear implement operations, the M108X tractor comes equipped with gear-type hydraulic pumps. The pumps churn out a total capacity of 18.1 gpm for the 3-point hitch and remote valves. For higher efficiency, a regulator valve and low pressure oil cooler keep hydraulic temperature low to maintain optimum oil temperature. |
|
| |
|
Digital LCD Readout
Another new feature, the digital LCD readout gives you precise control of your fieldwork, such as spraying, by indicating travel speed and PTO rpm. It’s conveniently located to your right-hand side. |
 |
| |
|
Operating Levers with Armrest
Operating levers for controlling hydraulics and shifts now offer an ergonomically-designed armrest to increase ease of use and reduce fatigue. |
 |
| |
|
Deluxe Air-ride Seat
Equipped with an adjustable air-suspension system, contoured, and generously padded, you’ll ride comfortably on your deluxe air-ride seat with swivel. |
 |
| |
|
Wide Rear View
To help you perform jobs more efficiently and safely, the lower rear panel has been replaced with glass. Now, you’ll always have a clear view of what’s going on behind you. |
 |
| |
|
Quick Attach/Detach Loader
Attaching and detaching the front loader doesn’t get any easier, thanks to boom stands and two mounting pins. With easy on and easy off, and without tools, this feature is sure to contribute to your overall operating efficiency. |
 |
| |
|
Skid Steer-type Quick Hitch
A standard feature on the LA1301S-1 loader, the quick hitch will let you quickly attach and detach a variety of Skid Steer-type attachments. Kubota original bucket, pallet fork, and bale spear are available. |
 |
| |
