New Holland Industrial Dryers |
|
| |
| Overview |
The Right Choice
Industrial dryers from New Holland speed production by drying two ways. Centrifugal force from the spinning action of the basket "throws off" excess water, oils, rinses or paints. At the same time, a turbine fan mounted below the basket creates a powerful suction that pulls air through the parts load for added drying power. Double-drying action is fast and reduces the scarring and marring frequently responsible for costly rejects. In most cases, you'll get unspotted, moisture-free parts in less than 60 seconds. |
| |
New Holland features add value:
- Soft Start control (models K-24, K-909 and K-94 only) provides a smooth, step less, reduced-voltage acceleration to minimize scarring and scratching of delicate parts. Tailor the initial torque and timing to your operation; then readjust for different parts loads as needed.
- Safety interlock switches the motor off when the lid is opened.
- Cover swings in either direction for ample loading clearance.
- Heavy-duty construction of arc-welded steel means years of trouble-free service.
- Exhaust outlet is conveniently located for direct drain connection or drip pans.
- Foot brake stops the spinning action quickly.
- Optional electric or steam heaters may be mounted in the cover.
- Optional timer provides more control of drying time cycle
- Reverse the direction of rotation to remove all moisture from cup-shaped parts.
- Optional variable speed control (inside control box) lets you control basket rotation from ten rpm up to the rated operating speed.
- Optional temperature control lets you maintain heat within a controlled range to protect heat-sensitive parts.
- Simple controls permit quick, easy operation.
- Rust- and acid-resistant epoxy paint stands up to corrosive rinses and harsh conditions.
|
| |
|
Easy three-step operation
1. Operator depresses foot brake to stop spinner and unlock cover. |
| |
|
 |
2. Cover swings in either direction, allowing ample loading clearance. Operator loads basket with parts and places it in the spinner housing. |
| |
|
 |
3. The operator must close the cover completely before the dryer will start. A button on the side of the electrical control box starts the spinning action of the drum. |
| |
|
| Model Choices |
 |
There are four dryer models with capacities to match your production requirements.
Model K-11 Tabletop Dryer (6 in. x 6 in.)
The K-ll tabletop dryer has a seven-pound capacity and is designed for short runs and lab testing. It's also ideal for drying very small plated parts like jewelry and electronic components.
- Overall height: 19.5 in.
- Work height: 16 1/8 in.
- Table space required: 9 3/8 in. x 14 in.
- Weight: 79 lbs.
- Operating speed: 1,100 rpm
- Motor size: 1/8 hp
- Basket size: 6 in. x 6 in.
- Capacity: 7 lbs.
|
| |
|
 |
Model K-24 (12 in. x 12 in.)
- Overall height: 36.5 in.
- Work height: 30 1/2 in.
- Floor space required: 24 in. x 37 in.
- Weight: 400 lbs.
- Operating speed: 825 rpm
- Motor size: 1 hp
- Basket size: 12 in. x 12 in.
- Capacity: 75 lbs.
Options
- Soft start
- Variable speed
- Timer
- Temperature control
|
| |
|
 |
Model K-90 (18 in. x 18 in.)
- Overall height: 40.5 in.
- Work height: 37 in.
- Floor space required: 31 in. x 40 in.
- Weight: 615 lbs.
- Operating speed: 625 rpm
- Motor size: 2 hp
- Basket size: 18 in. x 18 in.
- Capacity: 150 lbs.
Options
- Soft start
- Variable speed
- Timer
- Temperature control
|
| |
|
 |
Model K-94 (18 in. x 24 in.)
Ideal for high-volume finishing and machine shops.
- Overall height: 46.5 in.
- Work height: 43 in.
- Floor space required: 31 in. x 40 in.
- Weight: 690 lbs.
- Operating speed: 625 rpm
- Motor size: 3 hp
- Basket size: 18 in. x 24 in.
- Capacity: 250 lbs.
Options
- Soft start
- Variable speed
- Timer
- Temperature control
|
| |
|
| Model |
Size |
| K-11 |
6 in. x 6 in. (tabletop) |
| K-24 |
12 in. x 12 in. |
| K-90 |
18 in. x 18 in. |
| K-94 |
18 in. x 24 in. |
|
