New Holland CR9000 Twin Rotor Combines

Superior Harvesting Capacity and Grain Quality

The CR9000 Twin Rotor® combines, produced in Grand Island, NE, are the result of over 30 years of rotor technology and field experience. Year after year, the impressive grain quality and harvesting capacity of New Holland combines confirms the effectiveness of the Twin Rotor design. New Holland’s two rotors deliver 36% to 40% higher centrifugal force than competitive-brand combines for more efficient threshing and separating, while proven systems for cleaning and gentle grain handling compound that incredible capacity.

Take a Look at the CR9000 Series Model Year 2008 Enhancements and find out how your harvest can be more productive.

Exclusive Twin Rotor Design generates more centrifugal force than any other rotary design for faster separation, higher grain quality, and maximum capacity.

SLS Self-leveling Cleaning System has the largest cleaning area in the industry. It boosts capacity on flat ground and continues to deliver ultimate cleaning on slopes up to 15%.

Fuel-efficient, Turbocharged, Six-cylinder Engines let you choose between unloading power boost or an increased power rise. The power curve can be selected by the operator.

Harvest Suite™ Cab features industry-leading 110 cubic feet of interior room and provides unrivaled visibility, control and comfort, as well as state-of-the-art IntelliView™ II and IntelliView™ Plus II color performance monitors.

A Fully Integrated Precision Land Management (PLM) System is available.

Easy Servicing and Adjustment, with no daily lubrication requirements, means you spend more time harvesting.

Long Unloading Augers feature a new profile to provide an end discharge for an effective unloading length of 21 or 24 feet, making unloading easier with today’s large headers. A fast 3.2 bu./sec. unloading speed on all models with engine boost improves your productivity.

Complete Residue Management System allows you to spread and drop both chaff and straw with the flip of a lever.

Chaff Spreaders are now larger in diameter to enhance the spread pattern of chaff. The new width of spread is 30 feet or more.

Fins on the rear spreadboard have been flattened to give wider spreading and a more even distribution of residue.

Unique offset kingpin steering geometry allows more clearance to the frame and a sharper steering angle for impressive turning performance.

New Holland Headers are the perfect match for the high capacity of CR Twin Rotor combines.

• The 72C and 74C Cutterbar Headers are designed for maximum capacity and feature a 26-inch full finger auger for smooth, even feeding.
• The 76C Windrow Pick-up Header is available in two designs to match your needs: SwathMaster™ and Rake-Up™.*
• The 88C Floating Cutterbar Draper Header is ideal for in-ground harvesting.
• The 92C Rice Belt and 94C Grain Belt Draper Headers feature ultimate smooth feeding to enhance your combine performance.
• The 98C Corn Header features a unique low-profile point design to get under downed corn easily as well as automatic head height and lateral float (Terrain Tracer™).
• The 99C Chopping Corn Header has two chopping knives for each row, ideal for residue management and no-till or minimum till farming.

* SwathMaster™ and Rake-Up™ are trademarks of Precision Metal Fabricating, LTD.

Model Year 2008 Enhancements

Take a look at the Model Year 2008 CR9000 Series Combine enhancements that are sure to make your harvest more productive than ever.

IntelliSteer™Auto Guidance Ready and Complete

All CR9000 combines can be ordered with IntelliSteer™ auto guidance factory installed. (If required, the NH252 receiver/antenna has to be added.) IntelliSteer now incorporates more guidance functionality like straight A/B, curve, heading circles and spirals.

Two-speed Power Rear Axle

An optional two-speed power rear axle is now available. When high speed is engaged, ground speed is increased, and less torque is applied to the rear wheels, providing greater traction in slippery conditions or on hills.

Note: A two-speed switch in the cab operates the axle. Just press the switch to toggle between "Low Speed," High Speed" and "Off."

IntelliView™ II/IntelliView Plus II Display Mount

The IntelliView™ II and IntelliView Plus II mounting bracket is now located on the right-hand A post of the cab, improving visibility to the header and increasing the display's range of movement.

Abrasive Resistant Package Additions

• Adjustable rotor cover
• High-wear concaves
• High-density clean grain drives.

High Wear Concaves

High wear concaves are now available for all styles, factory- or field-installed. 

A new field peas special and a field peas special high wear concave are also available. The field peas special concave is designed for customers that want to harvest small grain crops and peas without changing concaves.

Wire Spacing:

• Field peas special concave: 35/64 in. (14 mm)
• Small wire concave: 25/64 in. (10 mm)

Adjustable Rotor Covers

Adjustable rotor covers are now available as options. Advantages:

• In easier threshing crop conditions, the veins can be advanced and rotor rpm increased to increase throughput.
• In high moisture corn with unthreshed cobs, the veins in the cove can be retarded to keep the crop in the rotor longer to ensure optimum separation.
• In high MOG (material other than grain, ie.sunflowers)the veins can be advanced to move crop out of the rotor faster with less MOG on the shoe.

Tier III New Holland Cursor 9 Engine

The CR9040 and CR9060 now feature a Tier III, 9-L New Holland Cursor 9 engine. This engine provides increased fuel economy, increased power at rated speed and increased maximum power. (Maximum power is reached at 2000 rpm.)

Maximum SAE hp @ 2100 rpm:

• CR9040: 322 hp
• CR9060: 360 hp

New Decaling

CR9000 Series decaling now reflects an updated version of the New Holland leaf, and the multiple colors of the former decal are replaced with New Holland blue.

ASP™ advanced stone protection system is standard equipment and uses the latest electronic detection technology to protect Twin Rotor combines from costly stone damage. Sensors located below the crop detect and eject stones others miss—and never impede crop flow. The feeder stops automatically, the operator is notified, the ejection door opens and the rock is ejected. Simply raise the head and the door is pulled closed and latched.

Extra-large Stone Ejection Door has a positive latching system, eliminating false openings from uneven feeding. Simply reverse the feeder and raise the head to close the stone door.

A Stone Deflector Sled positioned between the feeder chains also comes down with the ejection door, deflecting any approaching stones to the ground.

Easy One-lever, Left-side Head Latching System provides safe, secure, fast head connection. No need to kneel on the ground! A hydraulic multi-coupler provides one-step quick connect and disconnect for all hydraulic functions.

Twin Rotors Generate More Centrifugal Force than any other rotary design to get the grain out quickly for faster separation and maximum throughput. The faster separation virtually eliminates grain damage and loss.

High Level of Grain-on-grain Rubbing action releases grain quickly and gently-before it comes in contact with metal threshing components. This ensures gentle threshing with minimal damage and increased quality.

"S3" Rotors use separator bars that are staggered, segmented and spiraled to control the crop and move it evenly to eliminate bunching of material.

The CR9000 self-leveling cleaning system (SLS) is the most efficient system you’ll find anywhere, featuring a 68-inch grain pan along with a massive sieve area for superior capacity. The unique SLS is not just for hills. It provides unmatched cleaning capacity on flat ground and continues to deliver ultimate cleaning efficiency on slopes up to 15%.

The New Holland Grain Pan is Large with no Dividers, and it’s always kept level, so grain can stratify, spread out and separate easily. Competitive cleaning systems use augers, which actually serve to mix grain and chaff together, making it harder to separate and clean grain.

The Self-leveling System is very Forgiving, allowing you to operate in many crops and conditions with miminal adjustments required.

The Entire Cleaning System, including the fan, grain pan and sieves are kept level at all times, while the lower main frame follows the ground contours.

Oscillating Motion of the Grain Pan lifts and deposits grain repeatedly, stratifying it before it reaches the pre-cleaner sieve. The heavier free grain sifts to the bottom. When the grain and chaff reach the sieves, the grain falls through to the next level of cleaning while the lighter chaff is lifted to the top and blown away by the cleaning fan. Unthreshed grain (tailings) is re-threshed separately for maximum capacity.

Remote Adjustable Sieves are now standard equipment for on-the-go changes to match crop conditions.

CR9040

• New Holland Cursor
• SAE horsepower @ 2100 rpm: 322
• Max. horsepower @ 2000 rpm: 372
• Displacement: 9.0 liter

CR9060

• New Holland Cursor
• SAE horsepower @ 2100 rpm: 360
• Max. horsepower @ 2000 rpm: 410
• Displacement: 9.0 liter

CR9070

• New Holland Cursor
• SAE horsepower @ 2100 rpm: 400
• Max. horsepower @ 2000 rpm: 450
• Displacement: 10.3 liter

Engine Air Cleaner Canister draws fresher air from within the radiator and rotary screen compartment to lengthen engine air filter maintenance intervals and to provide the engine with the coolest air possible.

Electronic Engine Management provides an option of steep power rise for hard threshing conditions or for power boost to maintain your productivity at all times-even when unloading on the go.

The IntelliView™ II and Optional IntelliView™ Plus II Color Touch Screen Displays monitor critical engine functions and immediately alert the operator to any difficulties.

The New Holland Harvest Suite™ cab leads the industry in size and windshield area. It provides you with more comfort, more storage, better visibility and superior control. With a full 110 cubic feet of space, the Harvest Suite cab gives you more room than other combine cabs on the market—and we're talking about usable room in all directions, including headroom, space behind the seat and legroom.

A Huge, Curved, Tinted Windshield provides an unrivaled view, and the longer New Holland feederhouse provides outstanding visibility of the head and the after-cut.

Four Rubber Silencer Blocks make this cab virtually vibration-free and the quietest on the market.

Standard Air Suspension seat is fully adjustable to maximize your comfort.

The Steering Column adjusts three ways to maximize your visibility and legroom

A Full-width Instructional Seat offers superb comfort and safety when training operators.

Infinitely Adjustable Mounting Arm allows you to place the IntelliView™ II or IntelliView Plus II display in a position that's perfect for you.

Ample Storage Area includes space in the armrest and under both seats and a large compartment under the rear deck behind the seat.

Standard Automatic Temperature Control (ATC) cools and warms to keep the cab temperature just right for you.

The IntelliView II Color Display provides a wealth of information at a glance. Soft key navigation allows you to easily customize the performance information on the seven-inch screen. You can monitor header height, rotor performance, sieve performance, grain loss, tailings, the self-leveling cleaning system and more. The system includes complete onboard diagnostics to track critical engine functions, alerting you immediately to any difficulties. Data logging capability can be achieved using a USB connection.

The Optional, Fully-portable IntelliView Plus II Color Display features touch-screen navigation and a 10.4-inch diagonal screen. This monitor can be used with yield logging, yield mapping and the optional IntelliSteer™ auto guidance system.

Right-hand Control Console gives you fingertip access to all cutting, feeding threshing, separating and cleaning system controls. A lever at the front of the console allows you to position the console to suit your needs perfectly. These remote adjustments can be made from the cab:

• Concave clearance
• Thresher speed
• Cleaning fan speed
• Auto reel speed offset
• Stone trap sensitivity
• Upper sieve opening
• Lower sieve opening
• Hydraulic deck plates (if header equipped)
• Feeder speed (optional)

Programmable Push-button Crop Settings allow you to move quickly from one crop to another.

Electronic Four-speed Transmission makes shifting as easy as turning a dial.

A Wide Inspection Window at the rear of the cab allows you to check grain tank level and grain quality at a glance.

Best-in-class Lighting Package provides 360-degree, even illumination. There are six worklights mounted on the cab roof, eight more on the underside of the cab and, and two "row-finder" lights mounted to the mirror brackets. The "row-finder" lights illuminate when the head is raised at the end of the field, or when the engine is shut off and the operator exits the cab and closes the door. It stays on for 90 seconds-enough time for the operator to get to his truck.

Standard Rotating Beacons aid in road transport and signal grain cart and truck drivers that the grain tank is full.

Four Optional Rearview Mirrors (two are heated) can be positioned electrically from inside the cab.

Precision Land Management (PLM) is fully integrated into the design of a CR9000 combine, with several systems available factory-installed. A yield monitor with moisture sensors is standard on all CR9000 combines.

On-the-go Moisture Only Sensing
The CR9000 moisture sensor is mounted in the clean grain elevator housing and constantly samples the grain, measures its electronic conductivity, and calculates and displays its moisture content on the IntelliView™ II monitor.

IntelliSteer™ Auto Guidance Ready and Complete

All CR9000 combines can be ordered with IntelliSteer™ auto guidance factory installed. (If required, the NH252 receiver/antenna has to be added.) IntelliSteer now incorporates more guidance functionality like straight A/B, curve, heading circles and spirals.

WAAS, OmniSTAR VBS, OmniSTAR XP/ HP, and RTK Capability
The new fully portable NH252 antenna receiver provides WAAS, OmniSTAR VBS, OmniSTAR XP/ HP, and RTK capability. (RTK requires software upgrade to the receiver and the addition of a radio receiver).

WAAS:

• +/- 6 to 8 inch pass-to-pass
• +/- 3 feet year-to-year repeatable

Omnistar VBS:

• +/- 6 to 8 inch pass-to-pass
• +/- 3 feet year-to-year repeatable

Omnistar XP:

• +/- 3 to 5 inch pass-to-pass
• +/- 8 inch year-to-year repeatable

Omnistar HP:

• +/- 2 to 4 inch pass-to-pass
• +/- 4 inch year-to-year repeatable

RTK :

• +/- 1 inch pass-to-pass
• +/- 1 inch year-to-year repeatable

An Under-shield Light Kit is standard equipment to provide added visibility in low-light conditions.

The Redesigned Engine Cover provides even easier engine access.

A Water Detection Sensor has been added on the water separator in the primary fuel filter.

Toolbox and Batteries are located where they can be reached easily from the ground.

Large Doors make it easy to access the rotors and concaves as well as the separator grates.

Optional On-board Air Compressor allows you to clean areas of your machine no matter what your location.

Grease Interval is 50 hours minimum.

All Gear Boxes Have a Sight Glass for quick check.

Top Service

• 24/7 support provided by New Holland and New Holland dealers during the warranty period.

Triple Check

• Free winter inspection provided by New Holland and New Holland dealers during the first two seasons of use.